进口三柱塞高压往复泵(欧美进口十大品牌)

英国GRIMM格林进口三柱塞高压往复泵 UK GRIMM imported three plunger high pressure reciprocating pump

英国GRIMM格林进口三柱塞高压往复泵概述： 

          进口三柱塞高压往复泵是英国格林先进技术生产的超高压柱塞泵，压力最高达200MPa。流量为高压水射流所需的适中流量0.71L/min-1791L/min，适于做超高压水射流清洗、金属切割、船舶清洗除锈及工厂、制糖厂、发电厂等的冷凝器、热交换器、蒸发器、锅炉及各种罐釜的除垢清洗。即可泵送清水、乳化液，亦能泵送其它具有化学性质的液体。

英国GRIMM格林进口三柱塞高压往复泵结构原理: 

 

          进口三柱塞高压往复泵为卧式三柱塞单作用泵。泵的结构为对称布置。液体进出口连接管可在液加端二测选一则装接，整套设备都安装在同一公共底架上。

动力端：
机   身---全对称箱式钢性铸件，机身下部设计成油池。
曲   轴---优质碳素钢锻件。
连   杆---锌铝合金精铸件。
十字头---钢质筒形，简单耐用。
液力端：
材       料---针对输送介质选定。可为：碳钢、马氏体不锈钢、奥氏体不锈钢、超低碳不锈钢等。
密封结构---按输送介质，工作压力选定。密封材料可为：成型橡胶圈、碳纤维、麻纤维、芳纶等。
进排液阀---按介质压力与流量选定。可为平板阀、球阀、锥阀等。
润滑方式与油品牌号：
飞油润滑---润滑方法简单可靠。
油品牌号---N220#极压齿轮油。

英国GRIMM格林进口三柱塞高压往复泵性能特点： 

●适用于：阀门管道试压泵、高压清洗泵、计量泵、流程泵、加药泵、液压泵、输油泵等专业的用泵；高压和超高压清洗泵，石油、化工、化肥流程泵铜液泵，油田、盐矿注水泵，液态二氧化碳泵，五钠料浆泵、钢厂除磷泵、除锈泵。
●组装型式：有卧式、固定式、移动式。
●传动型式：有电动机、柴油机、齿轮箱、皮带轮、电磁调速、变频调速。
●每个品种的泵都装有安全调压阀，泵的压力可任意调节。
●你选型时如果流量不合适，可用电磁调速，变频调速，变换柱塞直径来调节流量，满足选型需要。
●泵体材料：合金钢、马氏体、奥氏体不锈钢、316、316L双相钢。

英国GRIMM格林进口三柱塞高压往复泵技术参数： 

 

流量范围：0.5-1791L/min
工作压力：2-200MPa
泵  转  速：60-500r/min
电机功率：0.5-350kw
泵  行  程：20-150mm
泵  推  力：350-12000kg
柱塞直径：10-130mm

 

 

英国GRIMM格林进口三柱塞高压往复泵用途： 

             适用于做管道清洗、工件清洗、表面清洗、清砂、除锈、液体输送、液体传动、工程掘进等，以及各种胶管、金属管、油田钻井井口设备试压用泵，即可泵送清水、乳化液，亦能泵送其它具有化学性质的液体。

UK GRIMM imported three plunger high pressure reciprocating pump summary:

           imported three plunger high pressure reciprocating pump is a super high pressure piston pump produced by Green advanced technology in England. The pressure is as high as 200MPa. Moderate 0.71L/min-1791L/min flow required for high pressure water jet, suitable for ultra high pressure water jet cleaning, metal cutting, ship cleaning derusting and factory, sugar factory, power plant condenser, evaporator, heat exchangers, boilers and various cleaning tanks. It can pump clean water, emulsion, and other liquid with chemical property.

 

UK GRIMM imported three plunger high pressure reciprocating pump structure principle: 

 

 

 

 

 

 

 

 

           imported three plunger high pressure reciprocating pump is horizontal three plunger single acting pump. The structure of the pump is symmetrically arranged. The liquid inlet and outlet connecting pipe can be measured and selected at the liquid adding end two, and the whole set of equipment is installed on the same public underframe.

Power end:

Fuselage --- full symmetrical box type steel casting, the lower part of the fuselage is designed as an oil tank.

Crankshaft -- high quality carbon steel forgings.

Connecting rod --- zinc aluminum alloy castings.

Crosshead --- steel cylinder, simple and durable.

Hydraulic end:

Material --- selected for conveying medium. Can be: carbon steel, martensitic stainless steel, austenitic stainless steel, ultra low carbon stainless steel, etc..

Sealing structure --- according to the transmission medium, the working pressure is selected. The sealing material can be formed rubber ring, carbon fiber, hemp fiber, aramid fiber and so on.

Inlet and outlet valves are selected according to medium pressure and flow rate. Flat plate valve, ball valve, cone valve, etc..

Lubrication method and oil brand number:

Grease lubrication --- the method of lubrication is simple and reliable.

Oil number ---N220# extreme pressure gear oil.

 

UK GRIMM imported three plunger high pressure reciprocating pump performance characteristics: 

 

 

 

 

 

 

 

 

 

Suitable for: pump pump, high pressure cleaning pump, metering pump, flow pump, dosing pump, hydraulic pump, oil pump and other professional test valves; high pressure and ultra high pressure cleaning pump, petroleum, chemical, chemical process pump copper liquid pump, oil, salt water injection pump, liquid carbon dioxide, sodium five the slurry pump, pump, pump rust removal of steel.

Assembly type: horizontal, stationary and mobile.

Driving type: motor, diesel engine, gear box, belt pulley, electromagnetic speed regulation, frequency conversion speed regulation.

Every type of pump is equipped with a safety pressure regulating valve, and the pressure of the pump can be adjusted at will.

When you type, if the flow is not appropriate, you can use electromagnetic speed regulation, variable frequency speed control, change the diameter of the plunger to adjust the flow rate, to meet the needs of type selection.

Pump material: alloy steel, martensite, austenitic stainless steel, 316 and 316L dual phase steel.

UK GRIMM imported three plunger high pressure reciprocating pump technical parameter:

 

 

 

 

 

 

 

 

 

 

 

 

 

Flow range: 0.5-1791L/min

Working pressure: 2-200MPa

Pump speed: 60-500r/min

Motor power: 0.5-350kw

Pump stroke: 20-150mm

Pump thrust: 350-12000kg

Plunger diameter: 10-130mm

UK GRIMM imported three plunger high pressure reciprocating pump purpose:

 

 

 

 

 

 

           Suitable for pipeline cleaning, workpiece cleaning, surface cleaning, cleaning, derusting, liquids, liquid transmission, engineering excavation, and all kinds of rubber hose, metal pipe, drilling wellhead equipment, oil pressure test pump can pump water, emulsion, also can pump with other chemical properties of liquids.

进口三柱塞高压往复泵官网：http://www.021fmc.cn/aspcms/product/2018-5-9/1321.html 

 

 

GRIMM中国：

    上海秉奇阀门有限公司为GRIMM公司在中国的总代理，是中国拥有GRIMM代理权及销售权，主要为中国地区客户提供服务与技术支持，同时，秉奇人员也积极参与总部技术培训学习，并不断掌握产品原理、实际运作、工程技术做为基石，完善对中国地区客户需求。             

关于GRIMM：

         英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商之一，公司总部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于领先地位。在许多个国家均有生产水泵基地，中国由上海秉奇阀门负责中国市场各项业务与技术支持中心，同时向中国市场销售。

       英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。

       英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系：

GRIMM品质：

       GRIMM公司注重产品质量及使用寿命，全部采用先进制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。

GRIMM专业：

       掌握核心的流体控制技术，提供市场领先的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。

GRIMM服务：

       我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

about GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英国格林总代理商：上海秉奇阀门有限公司，微信咨询：

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts：Huang Tianxiang

QQ：673088832

Mobile Phone:13524269805 (微信同号）

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District