系缆绞盘
Mooring winch
采用电动机（液压马达）等带动摆线针轮减速机调速，驱动绞缆筒作正（反）转。产品按GB/T4555-1995设计、制造。产品经过多国船级社检验，国内市场占有率达75%以上。性能稳定，
The motor (motor) and drive the cycloid pin wheel reducer drive, the drive sheave tube is (anti). Products according to GB/T4555-1995 design, manufacturing. Products through the countries Veritas test, the domestic market share of more than 75%. Stable performance,
用途：产品安装在舰船首、艉部主甲板上，在舰船起航时起锚或收缆，舰船停航抛锚、紧缆定位，为船舶系泊安全设备.
Use: the product is installed in the first, the ship stern main deck, anchor or cable collecting in ship set sail, the ship broke down, suspended cable tightening positioning, as the ship mooring safety equipment
分类：
Classification:
1、按形式分为电动和液压。
1, the form is divided into electric and hydraulic.
2、按用途分为系缆绞盘和锚绞盘。
2, divided by use of mooring winch and anchor winch.
组成：采用耐磨船用锚链轮、船用行星减速机、进口船用带刹车电机、主令电气控制箱、主令控制器为IP56型及无石棉环保刹车带等组成。
Composition: it is wear resistant marine anchor chain wheel, marine planetary reducer, import the marine band brake motor, main electric control box, a master controller for IP56 and non asbestos brake band composed of environmental protection.
主要技术参数:
Main technical parameters:
1、锚链直径：12.5—66mm
1, the diameter of anchor chain: 12.5 - 66mm
2、工作负荷：5.5—123kN
2, work load: 5.5 - 123kN
3、绞车拉力：5.5—110kN
3, winch pull: 5.5 - 110kN
4、电机功率：3—45KW
4, motor power: 3 - 45KW
Jiesheng ship deck machinery manufacturers of professional, low clearance type, manual type vehicle cabin with CCS, and so on. ABS, DNV, BV, GL, KR, RINA certificate. Product details please log in to www.txjscb.com and access to relevant data
点击图片查看原图
2439902778